Hobart – Dishwasher – PROFI AMX

Hobart Hood-Type Dishwasher PROFI AMX

This Hobart Dishwasher PROFI AMX from Hobart features many great qualities that will update and revolutionise your kitchen wash up areas. For starters, a wide angle fan nozzle creates high power jets of water for better distribution and superior wash results. Efficient as well as powerful, the dishwasher only requires a low 2 litres of water per wash, reducing electrical usage for heating and storing hot water. A four sided e-store hood also captures 70% of steam produced inside the washer, reducing more energy waste and wash tank heating. The dishwasher is also very safe concerning debris, with the Genius X2 filtration system capturing the majority of heavy particles from the dishes and evacuating it out of the wash tank to keep your wash water cleaner for longer and to increase the effectiveness of your chemicals. More than this, an interlocking strainer pan means the unit will not run unless the pan is in place, minimising the risk of foreign objects damaging the wash, rinse or drain pumps. With a single button for all controls, this vastly simplifies using the dishwasher: touch to turn it on, and hold it down for three seconds to turn off and automatically self-clean.




Product Features

  • Hood-type dishwasher for straight through or corner operation
  • Nominal capacity up to 60 racks/h or 1,080 plates/h or 2,160 glasses/h
  • 6 automatic cycles: short, standard, intensive, starch-removal, permanent, hygiene
  • Heat and noise insulated hood
  • Strainer soil sensor
  • Refill signal (detergent / rinse aid)
  • Self-cleaning programme
  • USB-interface for comfortable download of operational data
  • Ready to install – completely equipped: fill / drain hose, electrical cable, detergent dispenser, rinse aid dispenser, rinse pump, drain pump, back-flow preventer
  • Tank, frame, wash / rinse arms and panels are stainless steel 1.4301

Technical Data

  • Cycle times* 60 / 90 / 180 sec. and special cycles
  • Water consumption 2 l/rack
  • Tank capacity 23 l
  • Tank heating 5 kW
  • Power supply 400 / 50 / 3N
  • Booster loading – Standard 2 kW
  • Total loading – Standard 1 kW | 3 x 16 A
  • Wash pump 7 kW
  • Rack size 500 x 500 mm
  • Loading height 440 mm
  • Noise level 66 dB (A)
  • Weight (gross / net) 124 / 104 kg
  • *Thermostop guarantees required temperatures with cold water, the actual cycle times extend accordingly.
  • For corner operation we recommend to make the right side of the machine accessible for service.
  • For machine protection the water hardness should not exceed 3°dH, if higher we recommend using an integrated water softener or a HOBART HYDROLINE water treatment system.